ECE 388: Embedded Systems Design Proj - fall
Prerequisite: ECE 263 & ECE 202; for CPE/ECE majors only
General Education requirement: Natural Science Technology
Provides students with a complete design experience from initial concept development through finished product, expanding on topics taught in ECE 202, ECE 260, ECE 263 and ECE 368. The course format is a hands on laboratory format (3 credits) with 2 hours of lecture and 3 hours of lab. Students will develop their own designs, fabricate the design and formulate and carry out test strategies to validate design.
| Class# | Sct | Type | Seats | Units |
| 11535 |
01 |
Lecture |
48 |
3.00 |
Days |
Start |
End |
Location |
| MON TUE WED THU FRI SAT |
3:30 PM EST |
4:20 PM EST |
Science & Engr 212 |
| Instructor: Sezer Goren |
Class status: O |
| Prerequisite: ECE 263 & ECE 202; for CPE/ECE majors only |
| Non-Enrollment Section |
| Class instruction mode: In Person
|
| Class# | Sct | Type | Seats | Units |
| 11536 |
01L1 |
Laboratory |
24 |
3.00 |
Days |
Start |
End |
Location |
| MON TUE WED THU FRI SAT |
9:00 AM EST |
11:50 AM EST |
Science & Engr 218 |
| Instructor: Sezer Goren |
Class status: C |
| Prerequisite: ECE 263 & ECE 202; for CPE/ECE majors only |
| Enrollment Section |
| Class instruction mode: In Person
|
| Class# | Sct | Type | Seats | Units |
| 11537 |
01L2 |
Laboratory |
24 |
3.00 |
Days |
Start |
End |
Location |
| MON TUE WED THU FRI SAT |
9:00 AM EST |
11:50 AM EST |
Science & Engr 219 |
| Instructor: Anastasia Grosch |
Class status: O |
| Prerequisite: ECE 263 & ECE 202; for CPE/ECE majors only |
| Enrollment Section |
| Class instruction mode: In Person
|
| Class# | Sct | Type | Seats | Units |
| 11537 |
01L2 |
Laboratory |
24 |
3.00 |
Days |
Start |
End |
Location |
| MON TUE WED THU FRI SAT |
9:00 AM EST |
11:50 AM EST |
Science & Engr 219 |
| Instructor: Sezer Goren |
Class status: O |
| Prerequisite: ECE 263 & ECE 202; for CPE/ECE majors only |
| Enrollment Section |
| Class instruction mode: In Person
|